Respironics 920M Betreibershandbuch PDF herunterladen (Seite 31)

Troubleshooting Guide 25

You are unable to obtain

a green blinking pulse

quality display.

Low patient pulse strength;

the sensor site is poorly

perfused;

the sensor is not correctly

positioned.

Reposition the sensor on the

patient.

The sensor is attached too

tightly, or tape or other items

are restricting the pulse

quality at the sensor site.

Reapply the sensor, select an

alternate sensor site, or remove

the restrictive material from the

sensor site.

Circulation is reduced due to

excess pressure between

the sensor and a hard

surface.

Allow the sensor and finger, foot,

etc., to rest comfortably on the

surface.

Excessive ambient light. Reduce the ambient light.

Excessive patient motion. Reduce the patient motion.

The sensor is applied to a

polished finger or toe nail.

Remove the nail polish.

Interference from:

• arterial catheter

• blood pressure cuff

• electrosurgical procedure

• infusion line

Reduce or eliminate the

interference.

Pulse quality indicator is

blinking red and the

SpO

and/or pulse rate

displays show dashes.

An inadequate signal at the

sensor site.

Examine the patient:

reposition the sensor or select an

alternate sensor site.

Excessive motion at the

sensor site may be

prohibiting the 920M PLUS

from acquiring a consistent

pulse signal.

Eliminate or reduce the cause of

the motion artifact or reposition the

sensor to a sensor site where

motion is not present.

Sensor failure. Replace the sensor.

Segments of the SpO

pulse rate displays are

missing.

Defective LED displays. Displayed values may not be

reliable; discontinue use of the

920M PLUS.

Disruption in the 920M

PLUS performance.

Electromagnetic interference

(EMI).

Remove the 920M PLUS from the

EMI environment.

If these solutions do not correct the problem, please contact Respironics Customer Support

at (800) 345-6443 (USA and Canada) or (724) 387-4000.

1007336

3485-000-03

Troubleshooting Guide (Continued)

Problem Possible Cause Possible Solution

1 2 ... 26 27 28 29 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare

Respironics 920M Betreibershandbuch Seite 31

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern Respironics 920M